首页> 外文会议>International Conference on Advanced Materials for Better Future >Electrical Properties of Barium Titanate Doped Lanthanum(Ba_(1-x)LaxTiO3)Fabricated Using Co-precipitation Method
【24h】

Electrical Properties of Barium Titanate Doped Lanthanum(Ba_(1-x)LaxTiO3)Fabricated Using Co-precipitation Method

机译:使用共沉淀法制造钛酸钡掺稀镧(Ba_(1-x)Laxtio3)的电学性能

获取原文
获取外文期刊封面目录资料

摘要

Barium Titanate doped Lanthanum(Ba_(1-x)LaxTiO3)with variations in the concentration of mole dopants Lanthanum(x)0;0.01;0.02;0.03;0.04 and 0.05 by co-precipitation method.Bulk BaTiO2 and Ba_(1-x)LaxTiO3 were sintered at 1400 °C for 4 hours.The influence of variations concentration mole dopants of Lanthanum was analyzed through microstructure and electrical properties.The results of X-Ray Diffraction(XRD)analysis showed that the influence of variations concentration mole dopants of Lanthanum caused the diffraction angle to shift to the right.The influence of the variation concentration dopants mole of Lanthanum cause the dielectric constant to increase.The highest dielectric constant of 257.81 is obtained when the concentration of the La dopant mole is 5%(x=0.05)at a frequency of 40 kHz.The influence of Lanthanum dopant concentration variation on the morphology of the sample is that the more mole of dopant La added to BaTiO3 the smaller the size of the sample
机译:钛酸钡掺杂镧(1-x)laxtio3),摩尔掺杂剂镧镧(x)0浓度的变化; 0.01; 0.02; 0.03; 0.04和0.05通过共沉淀法。Bulk Batio2和Ba_(1-x )通过微观结构和电性能分析LAXTIO3在1400℃下烧结4小时。通过微观结构和电性能分析镧浓度摩尔掺杂剂的影响。X射线衍射(XRD)分析的结果表明,变异浓度摩尔掺杂剂的影响镧引起衍射角转移到右侧。变化浓度掺杂剂摩尔镧的影响导致介电常数增加。当La掺杂剂摩尔的浓度为5%时,获得了257.81的最高介电常数(x = 0.05)以40kHz的频率。镧掺杂剂浓度变化对样品形态的影响是加入BATIO3的掺杂剂La越少,样品的尺寸越小

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号