首页> 外文会议>International Conference on Mechanical and Electrical Technology >Recovery of Silver From Zinc Acid-leaching Residue by Flotation
【24h】

Recovery of Silver From Zinc Acid-leaching Residue by Flotation

机译:通过浮选从锌酸浸出残留物中恢复银

获取原文
获取外文期刊封面目录资料

摘要

Through flotation recovery of Silver (Ag) from Zinc acid-leaching residue (ZALR) was investigated in this study. The study adopted the single factor and orthogonal test reveal interactions among all considerable influence factors including sodium sulphide (SS) as regulator, ammonium butyl dithiophosphate (ABD) as major collector, GC as minor collector, interaction between ABD and GC, OC as flotation carrier, and pulp density. The experimental results show the flotation of the circuit composited of one rougher, one cleaner, one scavenger and middlings being back to the next rough flotation together is practical way and that the concentrate containing Ag 10890.0 g/t, recovery 77.43% can be obtained from the residue (Ag grade 340 g/t). The optimum roughing flotation process is: the pH value of flotation pulp is 3.0~4.0, the pulp density is about 45 wt.%, ABD dosage is 900 g/t, GC dosage is 50 g/t, OC dosage is 2000 g/t, and BK201 dosage is 100 g/t.
机译:通过来自锌酸浸出残留物(ZALR)的银(Ag)的浮选回收率在本研究中研究。该研究采用单因素和正交试验揭示所有相当大的影响因子之间的相互作用,包括硫化钠(SS)作为调节剂,二硫代磷酸铵(ABD)作为主要收集器,GC为次要收集器,ABD和GC之间的相互作用,AS浮选载体和纸浆密度。实验结果表明,一个更粗糙的电路的浮选,一个更清洁的,一个清除剂和中间物回到下一个粗糙的浮选,其实际的方式,含有Ag 10890.0 g / t的浓缩物,可以获得77.43%的浓度残留物(Ag级340克/吨)。最佳粗加工浮选过程是:浮选纸浆的pH值为3.0〜4.0,纸浆密度约为45重量%。%,ABD剂量为900g / t,GC剂量为50g / t,OC剂量为2000g / T,BK201剂量为100克/吨。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号