首页> 外文会议>International Conference on Calcined Clays for Sustainable Concrete >Calcined Clay-Cement Stabilisation - Physicochemical Attributes and Stabilised Strengths of a-1-a and a-2-6 Soils
【24h】

Calcined Clay-Cement Stabilisation - Physicochemical Attributes and Stabilised Strengths of a-1-a and a-2-6 Soils

机译:煅烧的粘土 - 水泥稳定 - 物理化学属性和A-1-A和A-2-6个土壤的稳定强度

获取原文

摘要

This work extends the investigations on calcined clay-cement blends to soil stabilisation works as obtained for other pozzolans. Samples of calcined clay (CC) were prepared from a natural kaolinite clay source from south-west Nigeria and were blended with Portland cement (PC) in CC:PC ratios of 0:1 (control), 1:3, 1:1, 3:1 and 1:0 to stabilise samples of lateritic soils from two sources. For each blend, combined stabilisers' percentages of 0, 2.5, 5, 7.5 and 10 of the soils' dry weight were adopted. The physical properties of the soils placed them in the A-l-a and A-2-6 AASHTO classes with fineness moduli (FM) of 4.33 and 2.18 respectively, indicating that the A-2-6 soil is finer, while the corresponding exchangeable cations (ECs) were 1.678 meq/100 gms and 1.738 meq/100 gms; these indicating that the A-2-6 soil has higher capacity for pozzolanic reactions. The 28-day unconfined compressive strength (UCS) tests on the stabilised soils samples show that the 1:1 and 1:3 blends were better stabilisers; this translating to environmental friendly alternatives to cement. The effects of these blends were more pronounced for the A-2-6 soil being the finer and with higher EC of the two soils. The two blends showed enhanced performance on the A-2-6 soil up to 10% binder content with UCS being 120% and 160% of control for 1:1 and 1:3 blends respectively. For the A-l-a soil, the edge over control was limited to 5% and 7% binder contents for the 1:1 and 1:3 blends respectively. The FM and ECs of the parent soil were raised as factors with potentials of affecting the performance of CC:PC blends as soil stabilisers. The paper calls for further work on lateritic soils from other sources to clearly establish the impact of these factors on their strengths when stabilised with CC: PC blends.
机译:这项工作扩展了对其他火山灰获得的土壤稳定工程的煅烧粘土共混物的调查。煅烧粘土(CC)的样品由来自西南尼日利亚的天然高岭石粘土源制备,并在CC:PC比为0:1(对照),1:3,1:1的CC:PC比(PC)混合, 3:1和1:0以稳定两个来源的外肤土样品。对于每个混合物,采用组合的稳定剂的稳定剂0,2.5,5,7.5和10的土壤的干重。土壤的物理性质分别将它们放入ALA和A-2-6 AAPTO类中,分别具有4.33和2.18的细度(FM),表明A-2-6土壤更精细,而相应的可更换阳离子(ECS )是1.678 MEQ / 100 GMS和1.738 MEQ / 100 GMS;这些表明A-2-6土壤具有更高的波佐酸反应能力。在稳定的土壤样品上测试28天的非整合抗压强度(UCS)测试表明,1:1和1:3共混物是更好的稳定剂;这转化为环境友好的水泥替代品。对于A-2-6土壤,这些共混物的效果更加明显是两种土壤的更细胞和较高的EC。两个共混物在A-2-6土壤上显示出高达10%粘合剂含量的增强性能,UCS分别为12%和160%的对照分别为1:1和1:3混合。对于A-L-A土壤,过度控制的边缘分别限于5%和7%的粘合剂含量,分别为1:1和1:3共混物。母体土壤的FM和EC被提出为影响CC:PC作为土壤稳定剂的PC混合物的潜力。该文件要求在与其他来源的外带土壤上进一步努力,以清楚地建立这些因素在稳定CC:PC混合物时对其优势的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号