We tried laser sintering of 316L stainless steel powder using resin powder. The laser sintering conditions such as laser power, scan speed and scan pitch with a YAG laser, and the influence of additional resin powder on the density and the tensile properties of the sintered alloy were investigated experimentally. The tensile specimen was laser-sintered with a YAG laser, and then debound and sintered in a vacuum furnace. The tensile specimen was successfully fabricated. The relative density and the tensile strength varied with the additional resin powder, and the optimum weight percentage of additional resin powder was around 4%.The relative density of the sintered alloy was approximately 85%, and the tensile strength and elongation of the sintered alloy were more than 280 MPa and 15% respectively.
展开▼
