首页> 外文会议>ASME international conference on ocean, offshore and arctic engineering >INVESTIGATION ON THE POST-ULTIMATE STRENGTH BEHAVIOUR OF DAMAGED STIFFENED PLATE OF SHIP STRUCTURE
【24h】

INVESTIGATION ON THE POST-ULTIMATE STRENGTH BEHAVIOUR OF DAMAGED STIFFENED PLATE OF SHIP STRUCTURE

机译:船舶结构受损伤加筋板的极限强度后行为研究

获取原文

摘要

Post-ultimate strength behaviour of ship structure can directly reflect its changing tendency of load carrying capacity. When the external load exerted on the ship structure exceeds the ultimate strength, sharply reduction of load carrying capacity will occur, especially for the damaged ship structure induced from grounding or collision. This paper focuses on the investigation on the post-ultimate strength behaviour of damaged stiffened plate of ship structure by using FEM, a series of stiffened plate modeling with different kinds of cracks are constructed. The parameters of crack includes length, width, depth, plate thickness and distribution direction. The post-ultimate strength behaviour of stiffened plate with cracks and intact ones are compared. Conclusion can be drawn as follows: (1) crack can induce the reduction of ultimate strength of stiffened plate, meanwhile, the stiffness and its load carrying capacity decrease accordingly. (2) in terms of stiffened thin plate, length of crack has a significant influence on the post-ultimate strength behaviour, the width of the crack has a huge influence on ultimate strength while the depth of crack has little influence; in terms of stiffened thick plate, the influence of crack depth on the post-ultimate strength behaviour becomes obvious. The width of the crack influence the post-ultimate strength behaviour a lot. (3) compare to the transverse crack, the influence of longitudinal crack on the post-ultimate strength behaviour is not obvious.
机译:船舶结构的最终强度行为可以直接反映其承载能力的变化趋势。当施加在船体结构上的外部载荷超过极限强度时,承载能力将急剧下降,尤其是由于接地或碰撞而导致的受损船体结构。本文利用有限元方法对船舶结构受损加筋板的极限后强度行为进行了研究,构建了一系列具有不同裂纹类型的加筋板模型。裂纹的参数包括长度,宽度,深度,板厚和分布方向。比较了带有裂纹和完整裂纹的加劲板的最终极限强度行为。结论如下:(1)裂纹会导致加劲板的极限强度降低,同时,刚度及其承载能力相应降低。 (2)就薄板的刚度而言,裂纹的长度对极限强度的影响很大,裂纹的宽度对极限强度有很大的影响,而裂纹的深度影响不大。就厚板的加筋而言,裂纹深度对最终强度行为的影响变得明显。裂纹的宽度对最终强度行为的影响很大。 (3)与横向裂纹相比,纵向裂纹对极限强度行为的影响不明显。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号