【24h】

Nitrogen removal during leachate treatment: comparison of simple and sophisticated systems

机译:渗滤液处理过程中的脱氮:简单系统与复杂系统的比较

获取原文
获取原文并翻译 | 示例

摘要

Membrane bioreactors (MBR) have become common in treating municipal wastewaters. Applied to leachales treatment MBR were also successful with pilot scale experiments and full-scale facilities as well. We succeeded previously in designing an efficient nitrification-denitrification process with an ethylene glycol byproduct as carbon source for denitrification. Moreover, an unexpectedly high inert COD removal efficiency was also observed in the full-scale MBR facility thereby making it possible to increase the operating time of the final GAC (Granulated Activated Carbon) adsorber. Since MBR are very sophisticated systems. Simpler and "lower" cost systems can also be considered. For example it is possible to nitrify leachates from sanitary landfill using a simple infiltration-percolation technique with a low energy cost. To validate previously published laboratory experiments, a semi industrial-scale pilot installation was installed at the Montzen landfill site (Belgium). The process is based on infiltration-percolation through a granular bed. This well known process was modified to increase the load, notably by changing the support medium, adding an electric fan that is run intermittently and maintaining temperatures greater than 15?. The new material is a type of granular calcium carbonate with a large specific surface area. These technical improvements enabled the system to nitrify up to 0.4 kg NH_4~+-N/m~3 of reactor bed per day at a hydraulic load of 0.35 m.d~(-1), with an ammonia removal rate in the range of 80 to 95%. Despite the high ammonia nitrogen inlet concentrations, this system exhibits remarkable nitrification efficiency. Moreover, these performances are achieved in a batch mode system without recirculation or dilution processes. If complete nitrification is needed, it can be obtained in a second in series of bioreactors. The system can be classified as a low cost process. An international patent is pending. Possible performances of those systems were compared with the usual methods for leachates treatment.
机译:膜生物反应器(MBR)在处理城市废水中已变得很普遍。 MBR也已成功应用于中试规模的实验和大规模的设施中。我们之前成功地设计了一种有效的硝化-硝化方法,该方法以乙二醇副产物为碳源进行反硝化。此外,在全尺寸MBR设备中还观察到了出乎意料的高惰性COD去除效率,从而可以增加最终GAC(粒状活性炭)吸附器的运行时间。由于MBR是非常复杂的系统。也可以考虑使用更简单,成本更低的系统。例如,可以使用简单的渗透渗滤技术以较低的能源成本对卫生垃圾填埋场的渗滤液进行硝化。为了验证以前发表的实验室实验,在Montzen垃圾填埋场(比利时)安装了半工业规模的试验装置。该过程基于通过颗粒床的渗透-渗滤。对这一众所周知的过程进行了修改,以增加负载,特别是通过改变支撑介质,添加间歇运行的电风扇并保持温度大于15℃。新材料是一种比表面积大的粒状碳酸钙。这些技术改进使系统在0.35 md〜(-1)的水力负荷下每天能够硝化多达0.4 kg NH_4〜+ -N / m〜3的反应器床,氨去除率在80至95%。尽管氨氮入口浓度很高,但该系统仍具有出色的硝化效率。而且,这些性能是在不进行再循环或稀释过程的间歇模式系统中实现的。如果需要完全硝化,可以在一系列生物反应器中第二次获得。该系统可以归类为低成本过程。一项国际专利正在申请中。将那些系统的可能性能与渗滤液处理的常规方法进行了比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号