首页> 外文会议>International conference on multi-functional materials and structures >Effect of Cold Rolling Deformation on Aging Precipitation of Cu-Cr-Sn-Zn Alloy
【24h】

Effect of Cold Rolling Deformation on Aging Precipitation of Cu-Cr-Sn-Zn Alloy

机译:冷轧变形对Cu-Cr-Sn-Zn合金时效沉淀的影响

获取原文

摘要

The effects of different extent of cold rolling on the aging properties in Cu-Cr-Sn-Zn alloy are investigated by hardness and electrical conductivity analysis and microstructure TME (transmission electron microscopy) observation of the alloy. The results shows that dislocations provide nucleation site for precipitation during aging treatment, and result in the precipitation hardening effect from a finer size of precipitates. At 60% ratio of cold rolling and aged at 450℃for 1h, the hardness and electrical conductivity can reach 171.3HV and 71.5%IACS respectively.
机译:通过硬度和电导率分析以及合金的显微组织TME(透射电子显微镜)观察,研究了不同程度的冷轧对Cu-Cr-Sn-Zn合金时效性能的影响。结果表明,位错为时效处理过程中的析出提供了形核位点,并且由于析出物的尺寸较小而导致了析出硬化作用。冷轧率为60%,在450℃时效1h,其硬度和电导率分别达到171.3HV和71.5%IACS。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号