首页> 外文会议>ASME/STLE international joint tribology conference 2012 >ELASTOHYDRODYNAMIC PISTON SKIRT LUBRICATION- EFFECT ON TRIBOLOGICAL PERFORMANCES
【24h】

ELASTOHYDRODYNAMIC PISTON SKIRT LUBRICATION- EFFECT ON TRIBOLOGICAL PERFORMANCES

机译:弹性动力活塞裙润滑-对摩擦学性能的影响

获取原文
获取原文并翻译 | 示例

摘要

A model of elastohydrodynamic lubrication of piston skirt is developed in this paper. The secondary motion of the piston, the lubrication and the elastic deformations of skirt and cylinder are described by a transient strongly nonlinear system coming from the coupling of the dynamics equations of piston secondary motion and the Reynolds equation. The iterative Newton-Raphson method in conjunction with Murty's algorithm for cavitation was used to solve the problem. An optimum skirt curved profile, which maintain piston in optimum performance characteristics, is adopted. Using the tribological performance of the lubricated skirt-cylinder, the results - minimum oil-film thickness, maximum pressure in the lubricant film and friction- are compared to the elastohydrodynamic solution and the rigid skirt-cylinder solution. The effect of elastic deformation of both skirt and cylinder show that elastohydrodynamic analysis is necessary for an accurate prediction of a piston- cylinder performance. The computational work, applied to a solid skirt piston of a V-8 direct injection diesel engine truck, should be a powerful design analysis tool, which can be used to increase the available engine power through optimum piston performance characteristics.
机译:建立了活塞裙的弹性流体动力润滑模型。活塞的二次运动,裙边和汽缸的润滑以及弹性变形由瞬态强非线性系统描述,该系统来自活塞二次运动的动力学方程和雷诺方程的耦合。牛顿-拉夫逊迭代法与Murty的气蚀算法相结合解决了该问题。采用了最佳的裙边弯曲轮廓,可以使活塞保持最佳性能。利用润滑的裙缸的摩擦学性能,将结果(最小油膜厚度,最大润滑膜压力和摩擦力)与弹性流体动力解决方案和刚性裙缸解决方案进行比较。裙部和缸体的弹性变形的影响表明,弹性流体力学分析对于准确预测活塞缸体的性能是必要的。应用于V-8直喷式柴油发动机卡车的实心裙状活塞的计算工作应该是功能强大的设计分析工具,该工具可用于通过最佳活塞性能特征来增加可用的发动机功率。

著录项

  • 来源
  • 会议地点 Denver CO(US)
  • 作者单位

    Laboratory of mechanical and energy, Faculty of Technology, PO Box 151 Road Sandjas, Chief Chief, Algeria;

    Institut P', department of Mechanical Engineering and complex system, University of Poitiers Poitiers, France;

    Laboratory of mechanical and energy, Faculty of Technology,PO Box 151 Road Sandjas,Chief, Algeria;

    Laboratory of mechanical and energy, Faculty of Technology,PO Box 151 Road Sandjas,Chief, Algeria;

    Laboratory of mechanical and energy, Faculty of Technology,PO Box 151 Road Sandjas,Chief, Algeria;

  • 会议组织
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号