首页> 外文会议>2019年第66回応用物理学会春季学術講演会講演予稿集 >Melt-processing of highly crystalline organic semiconducting layers for organic optoelectronics
【24h】

Melt-processing of highly crystalline organic semiconducting layers for organic optoelectronics

机译:用于有机光电的高结晶有机半导体层的熔融加工

获取原文

摘要

Organic semiconductors have been intensively investigated and used in a variety of organicoptoelectronic devices such as organic light-emitting diodes (OLEDs), organic lasers, organic solar cellsand organic field-effect transistors. A number of different techniques including vacuum vapor depositionand spin-coating have been used to deposit them into thin films. Here, we report on an improvedsolvent-free and vacuum-free melt-processing method to prepare organic semiconducting films with largecrystal size.For this purpose, we used a solution-processable oligo(p-phenylene vinylene) derivativesubstituted at both extremities with pyrene moieties. Compared to previous protocols already reported inthe literature, our work provides evidence that an accurate control of the temperature during therecrystallization of this material from the melt allows the formation of large single crystal monodomains inthe films. As a consequence of the presence of these large-size crystalline monodomains, themelt-processed organic films exhibit in transistor configuration higher charge carrier mobilities than inspin-coated polycrystalline thin films. We then investigated the photophysical and amplified spontaneousemission properties of the spin-coated and melt-processed thin films. The photoluminescence quantumyield was found to increase with the extent of crystallinity of the organic layer, due to a reduction of thenumber of grain boundaries. In addition, amplified spontaneous emission could be observed only in themelt-processed film. Overall, this work shows a simple and versatile melt-processing method to fabricateorganic layers with large crystal size, suitable for the realization of organic electronic and light-emittingdevices.
机译:对有机半导体进行了深入的研究,并将其用于各种有机 光电器件,例如有机发光二极管(OLED),有机激光器,有机太阳能电池 和有机场效应晶体管。多种不同的技术,包括真空气相沉积 旋涂和旋涂已被用于将它们沉积成薄膜。在这里,我们报告了一个改进的 无溶剂无真空熔体加工方法制备大面积有机半导体薄膜 为此,我们使用可溶液加工的低聚(对亚苯基亚乙烯基)衍生物 在两个末端均被pyr部分取代。与之前已报告的协议相比 根据文献,我们的工作提供了证据,表明在温度变化过程中可以精确控制温度。 该材料从熔体中重结晶可以在其中形成大的单晶单畴 电影。由于这些大尺寸晶体单畴的存在, 熔融加工的有机膜在晶体管配置中的载流子迁移率高于 旋涂多晶薄膜。然后,我们研究了光物理和自发放大 旋涂和熔融加工薄膜的发射特性。光致发光量子 由于有机层的结晶度降低,发现产率随有机层结晶度的增加而增加。 晶界数。此外,仅在 熔融加工膜。总的来说,这项工作展示了一种简单而通用的熔融加工方法来制造 晶体尺寸大的有机层,适合实现有机电子和发光 设备。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号