ONE-LOOP OPERATION OF PRIMARY HEAT TRANSPORT SYSTEM IN MONJU DURING HEAT TRANSPORT SYSTEM MODIFICATIONS

摘要

MONJU is a prototype fast breeder reactor (FBR). Modification work commenced in March 2005. Since June 2004, MONJU has changed to one-loop operation of the primary heat transport system (PHTS) with all of the secondary heat transport systems (SHTS) drained of sodium. The purposes of this change are to shorten the modification period and to reduce the cost incurred for circuit trace heating electrical consumption. Before changing condition, the following issues were investigated to show that this mode of operation was possible. The heat loss from the reactor vessel and the single primary loop must exceed the decay heat by an acceptable margin but the capacity of preheaters to keep the sodium within the primary vessel at about 200℃ must be maintained. With regard to the heat loss and the decay heat, the estimated heat loss in the primary system was in the range of 90-170kW in one-loop operation, and the calculated decay heat was 21.2kW. Although the heat input of the primary pump was considered, it was clear that circuit heat loss greatly exceeded the decay heat. As for preheaters, effective capacity was less than the heat loss. Therefore, the temperature of the reactor vessel room was raised to reduce the heat loss. One-loop operation of the PHTS was able to be executed by means of these measures. The cost of electrical consumption in the power plant has been reduced by one-loop operation of the PHTS and the modification period was shortened.