Characterization of Groundwater Quality Based on Regional Geologic Setting the Piedmont and Blue Ridge Physiographic Provinces, North Carolina

摘要

A compilation of groundwater-quality data collected as part of two U.S. Geological Survey studies provides a basis for understanding the ambient geochemistry related to geologic setting in the Piedmont and Blue Ridge Physiographic Provinces (hereafter referred to as Piedmont and Mountains Prov-inces) of North Carolina. Although the geology is complex, a grouping of the sampled wells into assemblages of geologic units described as geozones provides a basis for comparison across the region. Analyses of these two data sets provide a description of water-quality conditions in bedrock aquifers of the Piedmont and Mountains Provinces of North Carolina. Analyzed data were collected between 1997 and 2008 from a network of 79 wells representing 8 regional geozones distributed throughout the Piedmont and Mountains Provinces. This area has experienced high rates of population growth and an increased demand for water resources. Groundwater was used by about 34 percent of the population in the 65 counties of this region in 2005. An improved understanding of the quality and quantity of available groundwater resources is needed to plan effectively for future growth and development. The use of regional geologic setting to characterize groundwater-quality conditions in the Piedmont and Mountains Provinces is the focus of this investigation. Data evaluation included an examination of selected properties and the ionic composition of groundwater in the geozones. No major differences in overall ionic chemistry of groundwater among the geozones were evident with the data examined. Variability in the cationic and anionic composition of groundwater within a particular geozone appeared to reflect local differences in lithologic setting, hydrologic and geo-chemical conditions, and(or) land-use effects. The most common exceedances of the drinking-water criteria (in accordance with Federal and State water-quality standards) occurred for radon, pH, manganese, iron, and zinc. Radon had the most exceedances, with groundwater from 61 of the 69 sampled wells having activities higher than the U.S. Environmental Protection Agencys proposed maximum contaminant level of 300 picocuries per liter.