...
首页> 外文期刊>Applied optics >Effective mode-field diameter for few-mode fibers for considering splice loss characteristics
【24h】

Effective mode-field diameter for few-mode fibers for considering splice loss characteristics

机译:用于考虑拼接损耗特性的少量纤维的有效模式直径

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

We experimentally and numerically investigate the applicability of the conventional near-field pattern, far-field pattern (FFP), and variable aperture (VA) methods for measuring the effective mode-field diameter (MFD) of the higher-order modes, which can be used for accurately evaluating splice loss. We confirmed that the variation in the MFD values obtained with the FFP and VA methods can be converged by considering the minimum scanning angle and the minimum aperture angle, respectively, for both fundamental and higher-order modes. We reveal that the FFP and VA methods provide adequate effective MFD values for few-mode fiber (FMF), which can be used for evaluating the splice loss based on the conventional Gaussian fitting model. We also show the applicability of the effective MFD to four linearly polarized mode FMFs for considering the splice loss characteristics of each mode. (C) 2017 Optical Society of America
机译:实验和数值上研究了传统的近场模式,远场模式(FFP)和可变孔径(VA)方法的适用性测量高阶模式的有效模式直径(MFD),可以 用于准确评估剪接损耗。 我们确认使用FFP和VA方法获得的MFD值的变化可以通过考虑最小扫描角度和最小孔径角,用于基本和高阶模式。 我们揭示了FFP和VA方法为少量模式光纤(FMF)提供了足够的有效MFD值,其可用于基于传统的高斯拟合模型来评估拼接损耗。 我们还显示有效MFD对四种线性偏振模式FMFS的适用性,以考虑每个模式的拼接损耗特性。 (c)2017年光学学会

著录项

  • 来源
    《Applied optics》 |2017年第26期|共7页
  • 作者单位

    NTT Corp NTT Access Network Serv Syst Labs 1-7-1 Hanabatake Tsukuba Ibaraki 3050805 Japan;

    NTT Corp NTT Access Network Serv Syst Labs 1-7-1 Hanabatake Tsukuba Ibaraki 3050805 Japan;

    NTT Corp NTT Access Network Serv Syst Labs 1-7-1 Hanabatake Tsukuba Ibaraki 3050805 Japan;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 应用;
  • 关键词

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号