...
首页> 外文期刊>Applied optics >Single-/dual-pulse repetition rate variable supercontinuum light source with peak wavelength around 1.7 mu m using a modulated pump
【24h】

Single-/dual-pulse repetition rate variable supercontinuum light source with peak wavelength around 1.7 mu m using a modulated pump

机译:单/双脉冲重复率可变超连续光源,峰值波长约1.7μm使用调制泵

获取原文
获取原文并翻译 | 示例
           

摘要

A single-/dual-pulse repetition rate variable supercontinuum (SC) light source (SLS) with a peak wavelength of around 1.7 mu m (SLS around 1.7 mu m) is proposed and experimentally demonstrated. In our scheme, a 1.5 mu m modulated pump source included a laser and an intensity modulator (IM). The pump source can generate pulse trains with different repetitions and pulse durations. A1 km high nonlinear fiber (HNLF) was used as the nonlinear gain medium. A picosecond-pulsed SC signal was obtained by pumping the HNLF, and a wavelength division multiplexer was used for filtering residual pump. Additionally, a Sagnac loop was applied to create a multiwave-length pulse SC light source. The generated SC source covered from 1.59 to 1.96 mu m, and its peak wavelength was around 1.7 mu m. The single-/dual-pulse train can be produced and switched by adjusting the direct current bias and radio frequency driving oltages of the input signal to the IM. When the repetition rate of the generated pulse train was between 170 MHz and 2 GHz, the pulse duration of the dual-pulse train was between 60 ps and 180 ps. Additionally, the duty cycle of the dual-pulse operation was 40%. The single pulse SLS, around 1.7 mu m, can be a choice to improve optical coherence tomography (OCT) performance, and the dual-pulse source will be a reference for laser drilling applications. (C) 2020 Optical Society of America.
机译:提出峰值波长为约1.7μm(SLS约1.7μm)的单/双脉冲重复率可变超连续素(SLS),并实验证明。在我们的方案中,1.5μM调制泵浦源包括激光和强度调制器(IM)。泵浦源可以产生具有不同重复和脉冲持续时间的脉冲列车。 A1 Km高非线性纤维(HNLF)用作非线性增益介质。通过泵送HNLF而获得皮秒脉冲SC信号,并且使用波分复用器用于过滤残留泵。另外,施加SAGNAC环以产生多波长脉冲SC光源。产生的SC源从1.59到1.96 mu m覆盖,其峰值波长约为1.7亩。可以通过将输入信号的直流偏置和射频驱动OLTAGES调整到IM来生产和切换单/双脉冲系。当所产生的脉冲序列的重复率为170MHz和2GHz之间时,双脉冲序列的脉冲持续时间在60ps和180 ps之间。另外,双脉冲操作的占空比为40%。单脉冲SLS,约为1.7μm,可以是改善光学相干断层扫描(OCT)性能的选择,并且双脉冲源将是激光钻孔应用的参考。 (c)2020美国光学学会。

著录项

  • 来源
    《Applied optics》 |2020年第11期|共9页
  • 作者

  • 作者单位
  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 应用;
  • 关键词

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号