...
首页> 外文期刊>Synthetic Metals >Electrical and optical properties of p-type silicon based on polypyrrole-derivative polymer
【24h】

Electrical and optical properties of p-type silicon based on polypyrrole-derivative polymer

机译:基于聚吡咯衍生物的p型硅的电学和光学性质

获取原文
获取原文并翻译 | 示例
           

摘要

The junction characteristics of the conducting polymer NpCIPh PPy [N-(p-chloro phenyl) polypyrrole] on a p-type Si substrate have been studied at room temperature. A direct optical band gap energy value of conducting polymer (NpCIPh PPy) was obtained as 2.94 eV. The ideality factor and barrier height of Al/NpClPh PPy/p-Si/Al structure were determined from the forward current-voltage characteristics in the dark and were found to be 1.41 and 0.78 eV, respectively. The ideality factor and barrier height values for the Al/NpClPh PPy/p-Si/Al structure are larger than that of conventional Al/p-Si Schottky diode. The contact parameters were calculated from Cheung's functions and modified Norde's function. The results found out from different methods were compared with each other. The barrier height value of 0.89 eV was obtained from capacitance-voltage characteristic. The different values of barrier height indicate the existence of barrier inhomogeneities. The conducting polymer (NpCIPh PPy) modifies the effective barrier height of conventional Al/p-Si Schottky diode as the organic film forms a physical barrier between Al metal and p-Si.
机译:在室温下研究了导电聚合物NpCIPh PPy [N-(对氯苯基)聚吡咯]在p型Si衬底上的结点特性。获得的导电聚合物(NpCIPh PPy)的直接光学带隙能量值为2.94 eV。根据黑暗中的正向电流-电压特性确定Al / NpClPh PPy / p-Si / Al结构的理想因子和势垒高度,分别为1.41和0.78 eV。 Al / NpClPh PPy / p-Si / Al结构的理想因子和势垒高度值比常规Al / p-Si肖特基二极管大。接触参数是根据Cheung函数和改进的Norde函数计算得出的。将不同方法得出的结果进行了比较。根据电容-电压特性获得势垒高度值为0.89 eV。势垒高度的不同值表明存在势垒不均匀性。导电聚合物(NpCIPh PPy)改变了常规Al / p-Si肖特基二极管的有效势垒高度,因为有机膜在Al金属和p-Si之间形成了物理势垒。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号