...
首页> 外文期刊>Applied optics >Laser-ablated volume and depth as a function of pulse duration in aluminum targets
【24h】

Laser-ablated volume and depth as a function of pulse duration in aluminum targets

机译:铝靶中激光烧蚀后的体积和深度与脉冲持续时间的关系

获取原文
获取原文并翻译 | 示例
           

摘要

The ablated depth and volume per laser pulse from an aluminum target were measured for pulse durations that ranged from 80 fs to 270 ps at an average fluence of similar to100 J/cm(2) and a wavelength of 0.8 mum. The ablated volume showed a flat maximum for subpicosecond pulses and a minimum for similar to6 ps. The crater diameters were rather constant up to pulse durations of similar to6 ps and increased for larger pulse durations. As a result, the ablated depth also showed a plateau for subpicosecond pulses but decreased monotonically with pulse duration. A physical interpretation of these results and their consequences for laser applications are discussed. (C) 2005 Optical Society of America.
机译:测量了铝靶的每个激光脉冲的烧蚀深度和体积,脉冲持续时间在80 fs至270 ps的范围内,平均通量接近100 J / cm(2),波长为0.8 mm。消融后的体积显示出亚皮秒级脉冲的平坦最大值,而最小类似于6 ps的最小值。弹坑直径在直到大约6 ps的脉冲持续时间内相当稳定,并且在更大的脉冲持续时间内增大。结果,烧蚀深度也显示出亚皮秒脉冲的平稳期,但随脉冲持续时间单调降低。讨论了这些结果的物理解释及其对激光应用的后果。 (C)2005年美国眼镜学会。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号