Properties of Portland cement mortars incorporating high amounts of oil-fuel ashes

摘要

The residue of oil-fuel burned at the electrical power plant of Grao de Castellon (Spain) has been incorporated in Portland cement mortar and concrete. The used oil-fuel ash (OFA) had a high percentage of magnesium compounds because of magnesium oxide addition for removing slag and ashes from boilers and pipes. Several studies had been carried out on stabilization of toxic metals also occurring in oil-fuei ashes (particularly vanadium and nickel), by mixing with coal fly ashes and cement. In this case, the presence of magnesium compounds in the composition of the studied oil-fuel ashes could alter the mechanical and chemical prop- erties of the cement matrix in fresh and hardened mortar and concrete. We present here the chemical, physical and mineralogical characterization of oil-fuel ashes and the behaviour of Portland cement mortars incorporating high amounts of these oil-fuel ashes. The study includes workability, water demand, setting time, expansion and compressive strength developments. Preliminary results demonstrate a high absorption of water by oil-fuel ash particles, which promotes an increase in the water/cement ratio for a given workability. Acceleration of Portland cement/oil-fuel ash pastes setting times was observed, due to the presence of carbonates. On the other hand, no significant expansion in specimens due to the presence of magnesium compounds was detected and, consequently, mechanical properties of hardened mortars containing oil-fuel ashes did not decrease with curing time. Compressive strengths for mortars containing OFA were much lower, however, than control mortar samples.