...
首页> 外文期刊>Waste management & research >Volatility of heavy metals during incineration of tannery sludge in the presence of chlorides and phosphoric acid
【24h】

Volatility of heavy metals during incineration of tannery sludge in the presence of chlorides and phosphoric acid

机译:制革厂污泥在氯化物和磷酸存在下焚烧过程中重金属的挥发性

获取原文
获取原文并翻译 | 示例
           

摘要

Knowledge of the behaviour of heavy metals in the combustion process is a most important factor in selecting disposal alternatives for waste materials. Accordingly, in this work, the vaporization behaviour of highly concentrated heavy metals (Pb, Zn, Cu and Cr) in tannery sludge were investigated experimentally. The sludge was spiked with various chlorine compounds (i.e. PVC, FeCl_3, CaCl_2 and NaCl) and pre-treated with phosphoric acid in order to evaluate the capacity of enhancement and weakening of the volatility of the heavy metals contained in tannery sludge. The experimental results show that the vaporization percentages increased with increasing ratio of Cl/sludge and temperature, and the accelerating and increasing effect of the addition of chlorides on the vaporization percentage of heavy metals was dependent on the release capacity of chlorine radicals. The vaporization percentages of lead and zinc increased by 15-20%, whereas those of copper and chromium increased by only about 3 and 10% at 800℃. However, heavy metals were not expected to be completely released in the combustion process in spite of the high ratio of Cl/sludge. Alternately, heavy metals contained in tannery sludge can be immobilized effectively by pre-treat-ment with phosphoric acid. When the 85% phosphoric acid accounted for 10% of dry basis of tannery sludge, the phosphate-treated sludge showed the lowest vaporization percentage of about 3-15% with formation of Ca_(18)Cu_3(PO_4)_(14), Ca_9Cr(PO_4)_7, Ca_(19)Zn_2(PO_4)_(14) and PbMgP_2O_7 in the bottom ash.
机译:了解燃烧过程中重金属的行为是选择废物处理替代品的最重要因素。因此,在这项工作中,对制革污泥中高浓度重金属(Pb,Zn,Cu和Cr)的汽化行为进行了实验研究。向污泥中掺入各种氯化合物(即PVC,FeCl_3,CaCl_2和NaCl),并用磷酸进行预处理,以评估增强和减弱制革污泥中所含重金属挥发性的能力。实验结果表明,随着Cl /污泥比和温度的增加,汽化百分数增加,氯化物的添加对重金属汽化百分数的加速和增加作用取决于氯自由基的释放能力。在800℃时,铅和锌的汽化百分比增加了15-20%,而铜和铬的汽化百分比仅增加了约3%和10%。但是,尽管Cl /污泥的比例很高,但重金属预计不会在燃烧过程中完全释放。另外,制革厂污泥中所含的重金属可通过用磷酸进行预处理而有效地固定。当85%的磷酸占制革厂污泥干基的10%时,经磷酸盐处理的污泥的最低汽化百分比约为3-15%,并形成Ca_(18)Cu_3(PO_4)_(14),Ca_9Cr底灰中的(PO_4)_7,Ca_(19)Zn_2(PO_4)_(14)和PbMgP_2O_7。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号