Numerical studies on rockbolts mechanism using 2D discontinuous deformation analysis

摘要

To understand the response of rockbolts under various loads is an important part in the design of rock reinforcement. In this paper, the rockbolt models are developed within the frame work of the two-dimensional discontinuous deformation analysis (DDA). The rockbolt material is modeled by the elastic, linear strain-hardening behavior. To simulate the anchored system employed in various rockbolts, different bond stiffness are used for the interface between the rock and the rockbolt. The rockbolt models for the expansion shell anchored bolt, the split set, the fully grouted rebar and the D-bolt are considered in the simulations of the pullout tests. Extreme pull-out loadings were also applied to examine the bearing capability and deformation capability of the rockbolt system. In addition, two kinds of popular permanent rockbolts, the fully grouted rebar and D-bolt were further studied in the simulation of drop tests. The effects of impact amplitude and duration on the rockbolt behaviors were studied by single drops to demonstrate the advantage of D-bolt in energy dissipation. The results showed that the proposed rockbolt models can realistically predict the bonding forces and axial loading along the length of rockbolt.