Soil-water inrush induced shield tunnel lining damage and its stabilization: A case study

摘要

This paper reports a case study on shield tunnel lining damage induced by soil-water inrush occurred in Tianjin Metro Line 1, China through both field monitoring and numerical simulation. This incident was triggered by the non-watertight boring work of thru holes adjacent to the cross passage between the twin tunnels. Under high hydraulic gradient, the seepage-prone weak zone was formed and extended, then the outburst of soil-water slurry was occurred. Measures including plugging engineering cotton, injecting quick-setting cement and welding partition plate of steel segments, had been taken but in vain. The outburst of soil-water slurry induced soil movement around the cross passage, thus leading to the damage of tunnel lining and ground surface settlement. After sealing the water ingress holes, stabilization methods including surface grouting and inside tunnel back grouting were applied. The mechanisms of segment lining damage and the effectiveness of stabilization are investigated through both numerical simulation and field monitoring data analysis. Lessons learned from this incident have been discussed, thus providing reference for potential shield tunnelling under similar engineering conditions.