Insight into the influence of microbial aggregate types on nitrogen removal performance and microbial community in the anammox process - A review and meta-analysis

摘要

The anaerobic ammonium oxidation (anammox) process has been paid close attention in the wastewater treatment field because of its energy-saving advantages. Different microbial aggregates have been used in the anammox process, and there is an urgent need to evaluate the comparative efficiencies of the widely used types of microbial aggregates with respect to their nitrogen removal performance as well as microbial community. To address this, 1724 published papers concentrating on three types of microbial aggregates, namely granules, biofilm, and flocs were compiled. A quantitative meta-analysis was carried out to compare the standard error of nitrogen removal efficiencies among these three microbial aggregates. The data sources of this metaanalysis comprised articles on granules (42%), followed by those on biofilm (33%) and flocs (25%). The granular sludge appeared to be competent in achieving the highest average nitrogen removal efficiencies of 81.1%, followed by biofilm (80.8%). Flocs provided comparatively poor removal of nitrogen pollutants with the lowest removal efficiency of 74.1%. Biofilm had the highest abundance of functional microbial communities with 43.4% on Candidatus Kuenenia and 11.2% on Candidatus Brocadia, which were detected in the anammox system as common genera. This meta-analysis suggested that the microbial aggregate types of granules and biofilm had a relatively low heterogeneity and high total nitrogen removal efficiencies for the anammox process and were the recommended microbial aggregates for anammox bacteria cultivation and operation of the anammox process.