首页> 外文期刊>Oceanographic Literature Review >Fine-grained gas hydrate reservoir properties estimated from well logs and lab measurements at the Shenhu gas hydrate production test site, the northern slope of the South China sea
【24h】

Fine-grained gas hydrate reservoir properties estimated from well logs and lab measurements at the Shenhu gas hydrate production test site, the northern slope of the South China sea

机译:精细气体水合物储层性能估计,山湖天然气水合物生产试验部位,南海北坡北坡井测井和实验室测量

获取原文
获取原文并翻译 | 示例
           

摘要

Gas hydrate reservoir properties provide critical information on the controlling mechanisms of gas hydrate formation and accumulation in natural depositional environments. They also are essential to understanding and accurately predicting gas production characteristics. However, the properties of fine-grained reservoirs that host hydrates are poorly studied. Guangzhou Marine Geological Survey acquired a comprehensive set of logging-while-drilling (LWD) logs, in situ tests, and lab measurements from 2015 to 2018 in the W11 -17 fine-grained, gas hydrate reservoir of the Shenhu on the South China Sea. Porosity, hydrate saturation, and gas saturation were derived from neutron porosity, nuclear magnetic resonance (NMR), and electrical resistivity logs of SH-W17 and SHSC-4J1 wells and compared with lab measurements of pressurized cores. Units A to C contain three hydrate-concentrated intervals, with a maximum thickness of 32 m and an average hydrate saturation of 0.32 ±0.05. The hydrate saturation was estimated using resistivity and NMR models. Units D and E were inferred to be approximately 20 m thick, free-gas layers containing gas hydrates. Compared to hydrate saturation, the estimations of gas saturation from resistivity and NMR models are less reliable with a range of 0.05-0.4 due to the coexistence of gas hydrates and free gas. Permeabilities estimated from the NMR log agree well with those from neuron porosity in non-hydrate bearing intervals but are slightly higher in hydrate-bearing intervals. By incorporating the lab measurements and in situ tests into the NMR pore-size analysis, the permeability of water-bearing sediments in the hydrate intervals in the SHSC-4J1 well can be constrained to the range of 0.002-0.1 md, with 0.015 md being our best estimate. The NMR pore-size geometries indicate gas hydrates appear to preferentially fill bigger pores within fine-grained reservoirs, which exhibit a similar behavior to coarse-grained reservoirs. Our resistivity and relative permeability modeling indicate that the growth of gas hydrates within pore spaces is characterized by pore-filling and cementation behaviors.
机译:天然气水合物储层属性提供有关天然沉积环境中天然气水合物形成和积累的控制机制的关键信息。它们也对理解和准确地预测天然气生产特征至关重要。然而,宿主水合物的细粒储层的性质研究得很差。广州海洋地质调查收购了一套全面的钻井 - 钻孔(LWD)日志,原位测试和2015年到2018年的实验室测量在W11 -17细粒度,南海申湖的天然气水合物水库。孔隙率,水合物饱和度和气体饱和度源自SH-W17和SHSC-4J1孔的中子孔隙率,核磁共振(NMR)和电阻率测量,并与加压芯的实验室测量相比。单位A至C含有三个水合物浓缩的间隔,最大厚度为32米,平均水合物饱和为0.32±0.05。使用电阻率和NMR模型估计水合物饱和度。将单位D和E推断为约20米的自由气层,含有气体水合物。与水合饱和度相比,由于气水合物和空气的共存,电阻率和NMR型模型的气体饱和度和NMR模型的估计不太可靠,范围为0.05-0.4。从NMR日志估计的渗透率均匀于来自非水合物轴承间隔的神经元孔隙率的渗透性,但水合物间隔略高。通过将实验室测量和原位测试掺杂到NMR孔尺寸分析中,SHSC-4J1井中水合物间隔中的耐水沉积物的渗透率可被限制为0.002-0.1md的范围,0.015 md我们最好的估计。 NMR孔径几何形状表示气体水合物似乎优先填充细粒储层内的更大孔,这表现出与粗粒储层的类似行为。我们的电阻率和相对渗透性建模表明孔隙空间内的天然气水合物的生长特征在于孔隙和胶结行为。

著录项

  • 来源
    《Oceanographic Literature Review》 |2020年第10期|2191-2191|共1页
  • 作者

    D. Kang; J. Lu; Z. Zhang;

  • 作者单位

    Fugro Houston TX 77081 United States;

    Fugro Houston TX 77081 United States;

    Fugro Houston TX 77081 United States;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号