...
首页> 外文期刊>Journal of Vibration and Acoustics >Characteristics of Modal Sound Radiation of Finite Cylindrical Shells
【24h】

Characteristics of Modal Sound Radiation of Finite Cylindrical Shells

机译:有限圆柱壳的模态声辐射特性

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Characteristics of modal sound radiation of finite cylindrical shells are studied using finite element and boundary element methods in this paper. In the low frequency range, modal radiation efficiencies of finite cylindrical shells are found to asymptotically approach those of the corresponding infinite cylindrical shell when structural trace wavelengths of the cylindrical shells are greater than the acoustic wavelength. Modal radiation efficiencies for each group of modes having the same circumferential modal index decrease as the axial modal index increases. They converge to each other when the axial trace wavelength is much greater than the circumferential trace wavelength. The mechanism leading to lower radiation efficiency of modes with higher circumferential modal index of short cylinders is explained. Similar to those of flat plate panels, change in slope or waviness is observed in modal radiation efficiency curves of modes with higher order axial modal index at medium frequencies. This is attributed to the interference of sound radiated by neighboring vibrating cells when the distance between nodal lines of a vibrating mode is in the same order or smaller than the acoustic wavelength. The effects of the internal sound field on modal radiation efficiencies of a finite open-end cylinder are discussed.
机译:本文利用有限元和边界元方法研究了有限圆柱壳的模态声辐射特性。在低频范围内,当圆柱壳的结构迹线波长大于声波波长时,发现圆柱壳的模态辐射效率渐近地接近相应的圆柱壳的模态辐射效率。具有相同圆周模态指数的每组模态的模态辐射效率随着轴向模态指数的增加而降低。当轴向轨迹波长远大于圆周轨迹波长时,它们会聚。解释了导致短圆柱体具有较高周向模态指数的模的辐射效率较低的机理。与平板面板相似,在中频处具有较高阶轴向模态指数的模态的辐射效率曲线中观察到了斜率或波纹度的变化。当振动模式的节点线之间的距离等于或小于声波波长时,这归因于相邻振动单元辐射的声音的干扰。讨论了内部声场对有限端圆柱体的模态辐射效率的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号