首页> 外文期刊>Journal of surveying engineering >Performance Assessment of BDS Real-Time Precise Point Positioning Based on SSR Corrections
【24h】

Performance Assessment of BDS Real-Time Precise Point Positioning Based on SSR Corrections

机译:基于SSR校正的BDS实时精确点定位性能评估

获取原文
获取原文并翻译 | 示例
           

摘要

In recent years, real-time precise point positioning (RTPPP) using the BeiDou Navigation Satellite System (BDS) is facing new developments thanks to the dissemination of BDS real-time state space representation (SSR) corrections provided by some institutions. However, the quality and accuracy levels of these corrections remain unclear because they have not been provided for long. In this paper, methods of data accessing for RTPPP are introduced, and the quality of BDS real-time products provided by the Centre National d'Etudes Spatiales (CNES) and the performance of BDS-RTPPP are assessed and validated. It is indicated that the products currently suffer from the issues of unavailability and discontinuity, along with limited product accuracy. BDS-RTPPP is then implemented based on these corrections to validate positioning performance. For 6-h observations, the average final result of static positioning reaches 1.31, 2.15, and 6.18 cm in the north, east, and up components, respectively, and the average convergence time is 73.4 min. As for kinematic positioning, an average accuracy of 4.76, 6.70, and 7.07 cm can be achieved after an average convergence time of 86.1 min.
机译:近年来,由于一些机构提供的BDS实时状态空间表示(SSR)校正信息的传播,使用北斗导航卫星系统(BDS)的实时精确点定位(RTPPP)面临着新的发展。但是,这些校正的质量和准确性级别仍然不清楚,因为没有提供很长时间。本文介绍了用于RTPPP的数据访问方法,并评估和验证了国家空间研究中心(CNES)提供的BDS实时产品的质量以及BDS-RTPPP的性能。已经表明,产品当前遭受不可用和不连续的问题,以及产品准确性的限制。然后,基于这些校正来实施BDS-RTPPP,以验证定位性能。对于6小时的观测,在北,东和上部分,静态定位的平均最终结果分别为1.31、2.15和6.18 cm,平均收敛时间为73.4分钟。对于运动学定位,平均收敛时间为86.1分钟后,可以实现4.76、6.70和7.07厘米的平均精度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号