Hydrogen compression characteristics of a dual stage thermal compressor system utilizing LaNi_5 and Ca_(0.6)Mm_(0.4)Ni_5 as the working metal hydrides

摘要

The research performed herein consisted of the design, construction, and testing of a dual stage metal hydride hydrogen compression system intended to be used with lower grade geothermal or waste energy sources. The metal hydrides used in this study were LaNi_5 and Ca_(0.6)Mm_(0.4)Ni_5. A Finite Time Thermodynamics (FTT) model was also developed and the model proved useful in determining how the compression results and energy requirements for the system change with variations in the system parameters. Dual stage system results showed a final compression ratio of approximately 12 when using cooling and heating temperatures of 10 ℃ and 90 ℃, respectively. The final output pressures and compression ratios were found to follow an upward trend when increasing the heating bath temperatures. It can be concluded from the experimental results, that though the dual stage hydrogen compression system has room for improvement, it is an effective way of compressing the hydrogen from low initial pressures while using low grade energy sources.