Extending Imaging Depth in PLD-Based Photoacoustic Imaging: Moving Beyond Averaging

摘要

Pulsed laser diodes (PLDs) promise to be an attractive alternative to solid-state laser sources in photoacoustic tomography (PAT) due to their portability, high-pulse repetition frequency (PRF), and cost effectiveness. However, due to their lower energy per pulse, which, in turn, results in lower fluence required per photoacoustic signal generation, PLD-based photoacoustic systems generally have maximum imaging depth that is lower in comparison to solid-state lasers. Averaging of multiple frames is usually employed as a common practice in high PRF PLD systems to improve the signal-to-noise ratio of the PAT images. In this work, we demonstrate that by combining the recently described approach of subpitch translation on the receive-side ultrasound transducer alongside averaging of multiple frames, it is feasible to increase the depth sensitivity in a PLD-based PAT imaging system. Here, experiments on phantom containing diluted India ink targets were performed at two different laser energy level settings, that is, 21 and 27 mu J. Results obtained showed that the imaging depth improves by similar to 38.5% from 9.1 to 12.6 mm for 21-mu J energy level setting and by similar to 33.3% from 10.8 to 14.4 mm for 27-mu J energy level setting by using lambda/4-pitch translation and average of 128 frames in comparison to lambda-pitch data acquired with the average of 128 frames. However, the achievable frame rate is reduced by a factor of 2 and 4 for lambda/2 and lambda/4 subpitch translation, respectively.