We address the problem of improving the spatial resolution of ulrasound images through blind deconvolution. The ultrasound image formation process in the RF domain can be expressed as a spatio-temporal convolution between the tissue response and the ultrasonic system response, plus additive noise. Convolutional components of the dispersive attenuation and aberrations introduced by propagating through the object being imaged are also incorporated in the ultrasonic system response. Our goal is to identify and remove the convolutional distortion in order to reconstruct the tissue response, thus enhancing the diagnostic quality of the ultrasonic image. Under the assumption of an independent, identically distributed, zero-mean, non-Gaussian tissue response, we were able to estimate distortion kernels using bicepstrum operations on RF data. Separate 1D distortion kernels were estimated corresponding to axial and lateral image lines and used in the deconvolution process. The estimated axial kernels showed similarities to the experimentally measured pulse-echo wavelet of the imaging system. Deconvolution results from B-scan images obtained with clinical imaging equipment showed a 2.5-5.2 times gain in lateral resolution, where the definition of the resolution has been based on the width of the autocovariance function of the image. The gain in axial resolution was found to be between 1.5 and 1.9.
展开▼
