...
首页> 外文期刊>IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control >The shear coefficient for quartz crystal of rectangular cross section in Timoshenko's beam theory
【24h】

The shear coefficient for quartz crystal of rectangular cross section in Timoshenko's beam theory

机译:季莫申科光束理论中矩形截面石英晶体的剪切系数

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, we derive the shear coefficient K for quartz crystal of rectangular cross section in Timoshenko's beam theory of three-dimensional (3-D) elasticity. The theoretical result gives K as a function of the transformed elastic stiffness constants C/sub 22//sup '/, c/spl circ//sub 44/, C/sub 66/'. For an isotropic material it agrees completely with that derived by G.R. Cowper (1966). In addition, a value of K and its temperature coefficient versus cut angle is calculated so that K has a value of 0.796-0.867 and its temperature coefficient of the first order varies from -15.3/spl times/10/sup -6///spl deg/C to +13.2/spl times/10/sup -6///spl deg/C, when a Z-plate of quartz crystal is rotated with a cut angle /spl theta/ of 0-180/spl deg/ about the x axis. The values of K are then compared with those for isotropic materials obtained by other authors.
机译:在本文中,我们根据Timoshenko的三维(3-D)弹性梁理论推导了矩形截面石英晶体的剪切系数K。理论结果给出K作为变换的弹性刚度常数C / sub 22 // sup'/,c / spl circ // sub 44 /,C / sub 66 /'的函数。对于各向同性材料,它与G.R. Cowper(1966)。此外,计算K的值及其温度系数与切角的关系,以使K的值为0.796-0.867,其一阶温度系数的变化范围是-15.3 / spl次/ sup -6 ///当石英晶体的Z板以0-180 / spl deg /的切割角/ spl theta /旋转时,spl deg / C至+ 13.2 / spl次/ 10 / sup -6 /// spl deg / C关于x轴。然后将K的值与其他作者获得的各向同性材料的K值进行比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号