Improvement in transient piezoelectric responses of NDE transceivers using selective damping and tuning networks

摘要

NDE ultrasonic applications for quality control purposes, based on piezoelectric devices working as pulsed ultrasonic probes, usually include some tuning circuit either across the pulser output connectors or close to the piezoelectric probe electrodes. Classic criteria to determine tuning parameters in ultrasonic transducers do not perform very well in transient regime under the typical electrical conditions and peculiar output impedances of the required high-voltage pulsers. In most practical situations, the tuning values are manually adjusted in specific circuits for each NDE case, testing each channel of a multiprobe inspection system to find the best sensitivity. In this paper, the positive influences of certain selective damping and tuning networks on the time and frequency behaviors of NDE piezoelectric transceivers are analyzed in detail. Different waveforms and spectra of received ultrasonic signals are comparatively evaluated for different real tuning conditions, after passing through two ultrasonic processes linked in cascade: a transmitter of industrial type and a broad-band ultrasonic receiver. Piezoelectric transducer impedances, transduction transfer functions, and HV output spikes from a piezoelectrically loaded NDE pulser, are computed, to identify separately the influence of each stage. In order to improve amplitude and axial resolution in the received transient responses, relative contributions from emission and reception tuning networks are individually evaluated for a particular NDE two-stage piezoelectric channel. Also shown are the final experimental results relative to the ultrasonic test pulse and detected in a through-transmission NDE configuration, gradually improved by using distinct tuning levels.