High-Frequency Ultrasound Array Designed for Ultrasound-Guided Breast Biopsy

摘要

This paper describes the development of a miniaturized high-frequency linear array that can be integrated within a core biopsy needle to improve tissue sampling accuracy during breast cancer biopsy procedures. The 64-element linear array has an element width of , kerf width of , element length of 1 mm, and element thickness of . The 2–2 array composite was fabricated using deep reactive ion etching of lead magnesium niobate-lead titanate (PMN-PT) single crystal material. The array composite fabrication process as well as a novel high-density electrical interconnect solution are presented and discussed. Array performance measurements show that the array had a center frequency and fractional bandwidth ( ) of 59.1 MHz and 29.4%, respectively. Insertion loss and adjacent element crosstalk at the center frequency were and , respectively. A B-mode image of a tungsten wire target phantom was captured using a synthetic aperture imaging system and the imaging test results demonstrate axial and lateral resolutions of 33.2 and , respectively.