...
首页> 外文期刊>Energy >A novel method for sizing of standalone photovoltaic system using multi-objective differential evolution algorithm and hybrid multi-criteria decision making methods
【24h】

A novel method for sizing of standalone photovoltaic system using multi-objective differential evolution algorithm and hybrid multi-criteria decision making methods

机译:基于多目标差分进化算法和混合多准则决策方法的独立光伏系统规模确定的新方法

获取原文
获取原文并翻译 | 示例
           

摘要

Standalone photovoltaic system is promising sustainable energy source. Accurate modeling and sizing of these systems strongly affect the system's feasibility. Thus, in this paper, optimal sizing of standalone photovoltaic system is conducted based on multi-objective differential evolution algorithm integrated with hybrid multi-criteria decision making methods. Multi-objective differential evolution algorithm is used to optimize set of configurations of a system by minimizing technical and cost objective functions simultaneously. After that, an analytical hierarchy process integrated with a technique for order preference by similarity to ideal solution are used to order preference of configurations based on the loss of load probability and life cycle cost of system. The results of the proposed sizing method are validated by a numerical method to explain the superiority of the proposed method. According to results, the proposed sizing method is faster than numerical method by around 27 times. This is because the multi-objective differential evolution algorithm requires roughly 0.23 of simulations that is required by numerical method. Furthermore, the performance of multi-objective differential evolution algorithm is evaluated by various metrics. As a result, for the adapted load demand, the optimal configuration is 63 PV modules and 66 battery unit with maximum capacity of 500 Ah. (C) 2019 Elsevier Ltd. All rights reserved.
机译:独立的光伏系统有望成为可持续的能源。这些系统的准确建模和大小会严重影响系统的可行性。因此,在本文中,基于多目标差分进化算法与混合多准则决策方法相结合,对独立光伏系统进行了最优尺寸确定。多目标差分进化算法用于通过同时最小化技术和成本目标函数来优化系统配置集。此后,基于负载概率损失和系统生命周期成本,通过与理想解决方案相似的方法结合优先级排序的技术进行层次分析,从而对配置进行优先级排序。通过数值方法验证了所提出的上浆方法的结果,以说明所提出的方法的优越性。根据结果​​,提出的上浆方法比数值方法快27倍左右。这是因为多目标差分进化算法需要数值方法进行大约0.23的仿真。此外,通过各种指标评估多目标差分进化算法的性能。因此,为了适应负载需求,最佳配置是63个PV模块和66个电池组,最大容量为500 Ah。 (C)2019 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号