A WAMS/PMU-based fault location technique

摘要

A WAMS (wide-area measurement/monitoring system)/PMU (phasor measurement unit)-based fault location technique is proposed in this paper. The technique uses synchronized fault voltages of two nodes of the faulted line and their neighboring nodes for fault location. Based on these fault node voltages measured by PMUs, line currents between these nodes can be calculated. Then, node injection currents at two terminals of the faulted line are formed from the line currents. Based on the calculated fault node injection currents, fault node can be deduced or fault location in transmission lines can be calculated accurately. Fault location formulas are derived in full details. Case studies on IEEE-14-bus system and a testing network with 500 kV transmission lines including ATP/EMTP simulations are given to validate the proposed technique. Various fault types and fault resistances are also considered.