首页> 外文期刊>Minerals >The Impacts of Matrix Compositions on Nanopore Structure and Fractal Characteristics of Lacustrine Shales from the Changling Fault Depression, Songliao Basin, China
【24h】

The Impacts of Matrix Compositions on Nanopore Structure and Fractal Characteristics of Lacustrine Shales from the Changling Fault Depression, Songliao Basin, China

机译:基质成分对松辽盆地长岭断陷湖相页岩纳米孔结构和分形特征的影响

获取原文
       

摘要

The Lower Cretaceous Shahezi shales are the targets for lacustrine shale gas exploration in Changling Fault Depression (CFD), Southern Songliao Basin. In this study, the Shahezi shales were investigated to further understand the impacts of rock compositions, including organic matters and minerals on pore structure and fractal characteristics. An integrated experiment procedure, including total organic carbon (TOC) content, X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), low pressure nitrogen physisorption (LPNP), and mercury intrusion capillary pressure (MICP), was conducted. Seven lithofacies can be identified according to on a mineralogy-based classification scheme for shales. Inorganic mineral hosted pores are the most abundant pore type, while relatively few organic matter (OM) pores are observed in FE-SEM images of the Shahezi shales. Multimodal pore size distribution characteristics were shown in pore width ranges of 0.5–0.9 nm, 3–6 nm, and 10–40 nm. The primary controlling factors for pore structure in Shahezi shales are clay minerals rather than OM. Organic-medium mixed shale (OMMS) has the highest total pore volumes (0.0353 mL/g), followed by organic-rich mixed shale (ORMS) (0.02369 mL/g), while the organic-poor shale (OPS) has the lowest pore volumes of 0.0122 mL/g. Fractal dimensions D 1 and D 2 (at relative pressures of 0–0.5 and 0.5–1 of LPNP isotherms) were obtained using the Frenkel–Halsey–Hill (FHH) method, with D 1 ranging from 2.0336 to 2.5957, and D 2 between 2.5779 and 2.8821. Fractal dimensions are associated with specific lithofacies, because each lithofacies has a distinctive composition. Organic-medium argillaceous shale (OMAS), rich in clay, have comparatively high fractal dimension D 1 . In addition, organic-medium argillaceous shale (ORAS), rich in TOC, have comparatively high fractal dimension D 2 . OPS shale contains more siliceous and less TOC, with the lowest D 1 and D 2 . Factor analysis indicates that clay contents is the most significant factor controlling the fractal dimensions of the lacustrine Shahezi shale.
机译:下白垩统页岩子页岩是松辽盆地南部长岭断陷(CFD)湖相页岩气勘探的目标。在这项研究中,对Shahezi页岩进行了研究,以进一步了解岩石成分(包括有机物和矿物质)对孔隙结构和分形特征的影响。集成实验程序,包括总有机碳(TOC)含量,X射线衍射(XRD),场发射扫描电子显微镜(FE-SEM),低压氮物理吸附(LPNP)和压汞毛细压力(MICP)进行。根据基于矿物学的页岩分类方案,可以识别出七个岩相。无机矿物孔隙是最丰富的孔隙类型,而在沙河子页岩的FE-SEM图像中观察到的有机质(OM)孔隙相对较少。多峰孔径分布特征显示在0.5–0.9 nm,3–6 nm和10–40 nm的孔径范围内。沙河子页岩孔隙结构的主要控制因素是粘土矿物而不是OM。有机-中等混合页岩(OMMS)的总孔体积最高(0.0353 mL / g),其次是富含有机物的混合页岩(ORMS)(0.02369 mL / g),而贫有机页岩(OPS)的最低孔体积为0.0122 mL / g。分形维数D 1和D 2(在LPNP等温线的相对压力为0-0.5和0.5-1时)是使用Frenkel-Halsey-Hill(FHH)方法获得的,D 1的范围为2.0336至2.5957,D 2为2.5779和2.8821。分形维数与特定的岩相有关,因为每个岩相具有独特的成分。富含粘土的有机介质泥质页岩(OMAS)具有较高的分形维数D 1。另外,富含TOC的有机介质泥质页岩(ORAS)具有相对较高的分形维数D 2。 OPS页岩含更多硅质而TOC较少,D 1和D 2最低。因子分析表明,粘土含量是控制湖系沙河子页岩分形维数的最重要因素。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号