...
首页> 外文期刊>Energy Science & Engineering >Influence of micro‐pore structure in tight sandstone reservoir on the seepage and water‐drive producing mechanism—a case study from Chang 6 reservoir in Huaqing area of Ordos basin
【24h】

Influence of micro‐pore structure in tight sandstone reservoir on the seepage and water‐drive producing mechanism—a case study from Chang 6 reservoir in Huaqing area of Ordos basin

机译:致密砂岩油藏微孔结构对渗流和驱水机理的影响-以鄂尔多斯盆地华清地区长6油层为例

获取原文
           

摘要

To study the influence of pore structure on the seepage and water‐drive producing mechanisms, various methods were combined to describe the micro‐pore structure in the Chang 6 tight sandstone reservoir in the Huaqing area, Ordos Basin, China. Nuclear magnetic resonance (NMR) was combined with displacement experiments to determine the distribution of oil and water in pores of different scales before and after water flooding. There are few micro pores in the reservoir. As permeability increases, the distribution of nano pores decreases, while sub‐micro pores increase. Also, sub‐micro pores are the main pathway within the reservoir. There is a negative power function correlation between the minimum starting pressure gradient of the oil ( S wc ) and maximum throat radius. Also, with a decrease of permeability, smaller pore throats become more abundant and the nonlinear section of the flow velocity‐differential pressure curves increase. There is a large amount of crude oil gathering in the nano pores. As permeability increases, the main sources of movable oil are from the nano pores ( k g? ?0.4?×?10 ?3? μm 2 ), sub‐micro pores ( k g ≈ 0.4?×?10 ?3? μm 2 ‐1.0?×?10 ?3? μm 2 ), and micro pores ( k g ??1.0?×?10 ?3? μm 2 ). Displacement efficiency is always the highest in sub‐micro pores.
机译:为了研究孔隙结构对渗流和驱水机理的影响,结合多种方法描述了鄂尔多斯盆地华清地区长6致密砂岩储层的微孔结构。核磁共振(NMR)与驱替实验相结合,以确定注水前后水在不同尺度的孔隙中的分布。储层中几乎没有微孔。随着渗透率的增加,纳米孔的分布减少,而亚微孔的增加。同样,亚微孔是储层内的主要通道。油的最小启动压力梯度(S wc)与最大喉管半径之间存在负幂函数相关性。而且,随着渗透率的降低,较小的孔喉变得更丰富,流速-压差曲线的非线性部分增加。纳米孔中聚集了大量原油。随着渗透率的增加,可动油的主要来源来自纳米孔(kg?<?0.4?×?10?3?μm2)和亚微孔(kg≈0.4?×?10?3?μm2- 1.0××10×3×3μm2)和微孔(kg≥> 1.0××10×3×3μm2)。在亚微孔中,置换效率始终最高。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号