Ranging 39.6 to 78.7 inches - 1 to 2 meters - in cutting width, five models of crawler milling machines are available with efficiency-driven Bomag features. Drum side plates measure height using cable sensors, for milling at two heights. With use of the "Intelplaner" display, a cross-slope sensor allows milling to height and angle. An automatic coordinated front-rear steering mode provides tracking on tight curves without skewing the milling housing or damaging curbs. Transversely mounted engines drive the cutting drum directly via power belts, and auxiliary control panels allow steering and milling height to be controlled from ground level in difficult or critical conditions. For ease of transport, mechanically or hydraulically folding conveyors are standard.
展开▼