Bobcat

摘要

Mounted on the left Bob-Tach mount, the Bobcat rebar bender attachment comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added efficiency and consistency, the company says. Rebar up to a #6 grade can be bent up to 200 degrees, and the re- mote attachment control allows for operation of the rebar bender from outside the cab, and allows operators to start and stop their idled loader or Toolcat utility work machine from outside the cab. The wired remote control starts and stops the rotation of the bend pin. An optional bar stop is available that can be set at almost any angle for an automatic stop, and a re-peatable angle setting. Compatible machines for the rebar attachment include all Bobcat skid-steer loaders and CTLs.