Characterization of a Surface Hydrogen Charging Product Affecting the Mechanical Properties in 2205 Duplex Stainless Steel

摘要

When 2205 duplex stainless steel (DSS) is immersed in simulated seawater under high hydrostatic pressure, or in an electrochemically hydrogen charged state, a spindle-shaped product is found in the ferrite phase that seriously deteriorates the mechanical properties of 2205 DSS. This paper systematically studied the composition, structure, and properties of the hydrogen charging product. The results of a slow strain rate tensile test show that the hydrogen charging product evidently reduces the elongation of 2205 DSS, and microcracks mainly initiate at the interface between the hydrogen charging product and the ferrite matrix at either a low or a high strain rate. However, the elongation recovers to that of the hydrogen free sample after heating the sample at 300 °C for 0.5 h. The nano-hardness and reduced modules of the product are higher than those of the ferrite and austenite phases. An element analysis by energy dispersive spectroscopy (EDS) and secondary ion mass spectrometry (SIMS) indicates that the Ni and H contents in the hydrogen charging product are higher than in the normal ferrite area, and X-ray diffraction shows the characteristic peak of iron hydride at 40.07°. Moreover, a differential scanning calorimeter (DSC) test demonstrated that the phase decomposition temperature of the product is 268 °C, which coincides with the fact that it dissolves at a high temperature caused by the focused electron beam during transmission electron microscopy (TEM) analysis. All experimental results indicate that the hydrogen charging product is a hydride of FeH or (Fe, Ni)H.