Effect of iron ion configurations on Ni^(2+) removal in electrocoagulation

摘要

Electrocoagulation(EC)has been widely used to treat the heavymetal wastewater in industry.A novel process of sinusoidal alternating current electrocoagulation(SACC)is adopted to remove Ni2+in wastewater in this study.The morphology of precipitates and the distribution of the main functional iron configurations were investigated.Ferron timed complex spectroscopy can identify the monomeric iron configurations[Fe(a)],oligomeric iron configurations[Fe(b)]and polymeric iron configurations[Fe(c)].The optimal operating conditions of SACC process were determined through single-factor experiments.The maximum Ni2+removal efficiency[Re(Ni^(2+))]was achieved under the conditions of pH0=7,current density(j)=7 A/m^(2),electrolysis time(t)=25 min,c0(Ni^(2+))=100 mg/L.At pH=7,the proportion of Fe(b)and Fe(c)in the system was 50.4 at.% and 23.1 at.%,respectively.In the SACC process,Fe(b)and Fe(c)are themain iron configurations in solution,while Fe(c)are the vastmajority of the iron configurations in the direct current electrocoagulation(DCC)process.Re(Ni2+)is 99.56% for SACC and 98.75% for DCC under the same optimum conditions,respectively.The precipitates produced by SACC have a high proportion of Fe(b)configurations with sphericalα-FeOOH andγ-FeOOH structures which contain abundant hydroxyl groups.Moreover,it is demonstrated that Fe(b)has better adsorption capacity than Fe(c)through adsorption experiments of methyl orange(MO)dye.Fe(a)configurations in the homogeneous solution had no effect on the removal of nickel.