A variety of sensing and monitoring systems have been developed based on the concept of open-source and on open-source hardware and software components. Availability and relatively low cost of hardware components and availability and ease of use of software components allow access to sensing and monitoring technologies that were previously unattainable to many potential users. Advances in electronic monitoring and evolving cellular communications technologies are increasingly offering more, simpler, and less expensive options for remote monitoring. Due to the near-future cessation of 2G and 3G cellular network services, however, many existing monitoring systems will need to be redesigned to operate on alternative cellular networks. A soil-moisture monitoring system was developed incorporating updated open-source Arduino microcontrollers and the recently introduced LTE Cat-M1 cellular network to transmit sensor measurements via the cellular network for access on an internet website. The monitoring system costs approximately US$130 to construct the electronic circuitry and less than US$1 per month for cellular network access and data transmission. Data were transmitted with a 95% success rate, and the monitoring system operated continuously throughout an entire crop growing season with no battery recharge or maintenance requirements. The design and operation of the monitoring system can serve as a basis for other remote monitoring systems.
展开▼
