A New Kind of Renewable Energy: Production of Aromatic Hydrocarbons Naphtha Chemical by Thermal Degradation of Polystyrene (PS) Waste Plastic

摘要

Polystyrene (PS) waste plastic to renewable energy or naphtha grade fuel production through fractional distillation process was applied and PS liquefaction temperature range was 250?C - 430?C and fractional column temperature was 110?C - 135?C for naphtha grade fuel separation. The thermal degradation of PS waste plastic to renewable energy or naphtha grade chemical production was without adding any kind of cracking catalyst and without vacuum system. Polystyrene waste plastic is not bio-degradable and its can remain long period of landfill and creating gas emission for that reason its major cause climate change. For experimental purpose raw sample was use 1 kg of PS waste plastic and experiment was performed under Labconco fume hood and experiment was fully closed system, whole experiment was performed into stainless steel reactor. Produced fuel was analysis by gas chromatography and mass spectrometer, FT-IR and DSC. Analysis result indicate for fuel compounds chemical structure, compound band energy and enthalpy, delta H value. Produced fuel sulfur content less then environmental protection agency (EPA) level and fuel could be use for chemical feedstock refinery for further modification. By using this technology can reduce some foreign oil dependency and boost up renewable energy sector all over the world.