Flotation rate and residence time distribution in continuous coal froth flotation circuits and an evaluation of reagents and circuit variations for pyritic sulfur removal.

摘要

This thesis gives the results of research conducted on several aspects of coal froth flotation. The effect of operating variables on the residence time distribution in coal froth flotation cells is discussed, and a model of the residence time distribution is presented for use with flotation rate models in scaling up from laboratory to plant scale. Flotation rate models are also investigated in detail for continuous coal froth flotation circuits. Changes in operating variables were found to affect the mean residence time in cells, but they did not have much effect on the mixing behavior. The use of a time lag was found to be an important part of rate models for continuous froth flotation cells.;An important aspect of the use of such rate and residence time equations is their application to the flotation of gangue constituents, which often enter the froth by water carry-over in addition to natural flotation or flotation as slime coatings. As such, water carry-over is also investigated in this thesis for the laboratory and the plant and for both ash-forming minerals and pyrite. Maintaining a constant "froth factor," the percentage of froth above the weir, in both laboratory and plant tests is believed to be a critical factor in predicting plant results using a "kinetic factor ratio" documented in the literature.;Removing the pyrite and ash-forming minerals from coal that may be recovered by the water carry-over or other mechanisms is an important goal in coal froth flotation. This thesis also contains the results of tests with pyrite depressants and circuit variations for removal of pyritic sulfur.