Study on pulping performance of a novel coal water slurry additive for Shenhua coal slurry with high concentration

摘要

Shenhua coal is difficult to form slurry of high concentration, low viscosity for its strong hydrophilicity. Based on that, coal water slurry (CWS) additive, denoted as LS-A, was used to prepare Shenhua coal blending slurry with high concentration, and then the slurry ability, rheological characteristic and static stability of LS-A were investigated. The results show that, the performances of CWS were improved by LS-A, and it had good viscosity reducing effect. The slurry concentration could reach 65.5%, and the apparent viscosity is smaller than 1200 MPa·s with good flow property under 100 s-1 of shearing rate when the dosage of LS-A was 0.7%. The rheological investigation indicated that the slurry pumped with LS-A is pseudoplastic fluid, and it had rheological property of shear-thinning, evident thixotropic property and good stability. Moreover, the comparison of pulping properties and stability between LS-A and the additive SPHF-3 of National CWS Center showed that, the slurry ability was similar under same additive dosage.