首页> 外文会议>International Workshop on Designing of Interfacial Structures in Advanced Materials and Their Joints; 20060518-20; Osaka(JP) >Reaction of Sn to Nanocrystalline Surface Layer of Cu by Near Surface Severe Plastic Deformation
【24h】

Reaction of Sn to Nanocrystalline Surface Layer of Cu by Near Surface Severe Plastic Deformation

机译:近表面严重塑性变形使Sn与Cu的纳米晶表层反应

获取原文
获取原文并翻译 | 示例

摘要

The near surface ultrafine grains (NSUFG) layer with grain sizes of about 35nm to 200nm from surface to about 10 μ m was prepared in the OFHC-Cu sheet with coarse grains size of about 7.2 μ m (CG-Cu) by Near Surface Sever Plastic Deformation method. The solid reactions of Sn to NSUFG layer and CG-Cu were basically investigated at 379K to 493K for 1 × 10~3 to 6 × l0~6s. The Cu_6Sn_5 (η) and Cu_3Sn (ε) layers were formed between Cu and Sn. The thickness of the ε layer in NSUFG-Cu/Sn was similar to that in CG-Cu/Sn one, while the thickness of the η layer in NSUFG-Cu/Sn reaction was about two times thicker than that in CG-Cu/Sn one. This enhancement of the η layer growth in NSUFG-Cu/Sn reaction was due to the large supply of Cu atoms to the reaction layer by the grain boundary diffusion in the NSUFG-Cu. The rate-controlling processes of layer growth were boundary diffusion mechanism in reaction layer at lower temperatures in shorter annealing time, and volume diffusion mechanism at higher temperatures in longer annealing times.
机译:通过近表面切割法在具有约7.2μm的粗晶粒尺寸(CG-Cu)的OFHC-Cu片材中制备从表面到约10μm的晶粒尺寸为约35nm至200nm的近表面超细晶粒(NSUFG)层。塑性变形法。基本研究了Sn对NSUFG层和CG-Cu的固相反应,反应时间为379×493〜1×10〜3〜6×10〜6s。在Cu和Sn之间形成Cu_6Sn_5(η)和Cu_3Sn(ε)层。 NSUFG-Cu / Sn中ε层的厚度与CG-Cu / Sn中的相似,而NSUFG-Cu / Sn反应中的η层的厚度大约是CG-Cu / Sn中的两倍。锡一。 NSUFG-Cu / Sn反应中η层生长的这种增强是由于通过NSUFG-Cu中晶界扩散向反应层提供了大量Cu原子。层生长的速率控制过程是在较短的退火时间内在较低温度下反应层中的边界扩散机制,在较长的退火时间下在较高温度下的体积扩散机制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号