Effects of Continuous Annealing Process on Microstructures and Properties of C-Mn-Si Bearing Cold Rolled TRIP Steel

机译：连续退火工艺对C-Mn-Si轴承冷轧TRIP钢组织和性能的影响

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

Effects of continuous annealing process on microstructure and properties of Si based cold-rolled TRIP Steel were studied. The results showed that the TRIP effect was more obvious on the condition of 800℃ × 120s annealing process and 400℃ × 520s aging treatment than others progress. Yield strength of the tested steel was 405MPa, tensile strength was 670MPa, elongation was 32% and strain hardening exponent was 0.230. The microstructures were ferrite, bainite and retained austenite and the volume fraction of retained austenite for the tested steel was 9.20%.

机译：研究了连续退火工艺对硅基冷轧TRIP钢组织和性能的影响。结果表明，在800℃×120s的退火工艺和400℃×520s的时效处理条件下，TRIP作用更为明显。被测钢的屈服强度为405MPa，抗拉强度为670MPa，伸长率为32％，应变硬化指数为0.230。显微组织为铁素体，贝氏体和残余奥氏体，并且测试钢的残余奥氏体的体积分数为9.20％。

著录项

来源
《AIST steel properties amp; applications conference proceedings : Combined with MSamp;T' 10 materials science and technology 2011》|2011年|p.449-456|共8页
会议地点 Columbus OH(US);Columbus OH(US);Columbus OH(US)
作者
W. Lihui; T. Di; J. Haitao; L. Jibin; C.H. Yu;
展开▼
作者单位

National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing, China,Research and Development Center of Wuhan Iron and Steel Group Corp., Wuhan, China;

National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing, China;

National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing, China;

Research and Development Center of Wuhan Iron and Steel Group Corp., Wuhan, China;

Research and Development Center of Wuhan Iron and Steel Group Corp., Wuhan, China;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类工程材料一般性问题;
关键词
TRIP steel; annealing process; retained austenite; microstructure; property;

机译：TRIP钢；退火工艺残余奥氏体微观结构属性;

相似文献

外文文献
中文文献
专利

1. Effect of heat treatment on microstructure and mechanical properties of cold rolled C-Mn-Si TRIP-aided steel [J] . Ashok Kumar Srivastava, G. Jha, N. Gope Materials Characterization . 2006,第2期

机译：热处理对C-Mn-Si TRIP冷轧辅助钢组织和力学性能的影响
2. Texture development in cold rolled and annealed C-Mn-Si and C-Mn-Al-Si TRIP steels [J] . M. De Meyer, L. Kestens, B. C. De Cooman Materials Science and Technology: MST: A publication of the Institute of Metals . 2001,第11期

机译：C-Mn-Si和C-Mn-Al-Si TRIP冷轧和退火钢的织构发展
3. Evolution of microstructure and mechanical properties of cold-rolled SUS430 stainless steel during a continuous annealing process [J] . Xiong Zhang, Zhi Wen, Ruifeng Dou, Materials Science and Engineering . 2014,第mara26期

机译：SUS430冷轧连续退火过程中组织和力学性能的演变
4. Effects of Continuous Annealing Process on Microstructures and Properties of C-Mn-Si Bearing Cold-Rolled TRIP Steel [C] . Lihui Wang, Di Tang, Haitao Jiang, International Conference on Materials and Products Manufacturing Technology . 2013

机译：连续退火过程对C-MN-Si轴承冷轧钢钢组织及性能的影响
5. The mechanical properties and microstructures of vanadium bearing high strength dual phase steels processed with continuous galvanizing line simulations. [D] . Gong, Yu. 2015

机译：通过连续镀锌线模拟处理的含钒高强度双相钢的力学性能和显微组织。
6. Microstructure and Mechanical Properties of Hot- Rolled and Cold-Rolled Medium-Mn TRIP Steels [O] . Chunquan Liu, Qichun Peng, Zhengliang Xue, 2018

机译：热轧和冷轧中锰TRIP钢的组织和力学性能
7. Microstructure Evolution and Mechanical Properties of C-Mn Cold Rolled Dual Phase Steel after Continuous Annealing Process in Laboratory Conditions [O] . Šebek M., Horňak P., Zimovčák P., 2014

机译：实验室条件下连续退火后C-mn冷轧双相钢的组织演变及力学性能

Effects of Continuous Annealing Process on Microstructures and Properties of C-Mn-Si Bearing Cold Rolled TRIP Steel

摘要

著录项

相似文献

相关主题

期刊订阅